OTC DAIHEN ASIA Co., Ltd.

PRODUCTS

 
 

FD-VC4

 
 
 
 

Collaborative Robot for Arc Welding

 
 
Optimum Collaborative Robot for Arc Welding
 
Easy installation and easy relocation
Active at various welding sites!
 
Birth of optimum Collaborative Robot for Arc welidng with high track accuracy and high durability!
 
 
 

SPECIFICATIONS

 
 
Quality Achieves high track accuracy enabling high quality welding
 
Collaborative robots with low trajectory accuracy may cause welding defects as shown in the figure on the right.

Daihen, who knows everything about welding, has developed a new control technology to improve the trajectory accuracy of linear and circular interpolation, which affects welding quality, and installed it in collaborative robots.

Achieves high-quality welding with stable trajectory accuracy equivalent to that of industrial robots.
 
Quality
 
Use Various welding methods are selectable
 
By adopting the same controller as an industrial robot, a wide variety of peripheral devices and functions can be used.Various welding methods such as CO2/ MAG welding, ultra-low spatter welding, and TIG welding can be selected to suit the site, and a full range of welding functions can be used, so they are applied to all welding sites.
 
Use
 
Support Option Simple robot operation
 
Support

Collaborative robots active inVarious sites

Space saving Installation is possible even if there is no separation from people by safety fence.
 
The cooperating robot can work in the same space as a person without installing a safety fence.※1
Therefore, it is no longer necessary to secure a large space for introduction like conventional industrial robots.
※1 If a safety fence is not installed, a risk assessment by the customer is required.
FD-VC4 complies with ISO 10218-1 safety standard for industrial robots.
In addition, the Robot Controller conforms to the international standard "ISO 13849-1PLd(Cat.3" and safety certification by a third-party certification body has acquired.
 
Space saving
 
Safety When contact with a human is detected, the robot stops.
 
The cooperative robot is equipped with a safety function that automatically stops when a force exceeding a preset contact detection level is detected.
In addition, it has an arm shape that prevents pinching of hands and fingers, and a design that eliminates corners, thereby alleviating impact during contact.
 
Safety
 
Move Move to the site where it is needed and run immediately.
 
 
Easy-to-install, mobile, and easy-to-move collaborative robots can be easily relocated to suit customer conditions, such as changes in production volume or labor shortages.
Automation in large structures, such as shipbuilding, is also possible, and will be used in a variety of welding sites.
Move
 
 
Service Support for safety after introduction
Connect the robot to a service center via the Internet and advise on robot operation and construction conditions.
Safe and secure support can be provided as if a veteran service employee were present near the customer.
 
Service
 
 
 
 
 
 
 
 

 
©2013 OTC DAIHEN ASIA Co., Ltd. All Rights Reserved.
Tel: (+66) 2529-2130 Fax: (+66) 2529-2132
 

Welcome to Arc welding Contact tip Handling robot Plasma cutting Spot machine Welding machine Welding robot Welding torch of quality welding products.